During the rainy season, special attention should be paid to the following matters when using energy-saving air compressors to ensure their normal operation and extend their service life:
Waterproof and moisture-proof measures: Keep drainage unobstructed: Due to the high humidity during the rainy season, air compressors are prone to condensation. Therefore, it is necessary to check the drain valve regularly to ensure that the water can be discharged in time to avoid water accumulation in the system.
Check the dryer: The function of the dryer is to remove moisture from the air. Ensure the operation of the dryer to ensure the dryness of the air.
Prevention in independent air compressor rooms: Please keep the air in the air compressor room ventilated, check whether there is water leakage on the roof, and check whether the doors and windows are aging to prevent rainwater from drifting into the station room. At the same time, clear the passages and drainage channels in advance and increase the frequency of inspections.
Lightning protection and electrical accident prevention: Carry out a comprehensive and detailed check on the grounding of all equipment to ensure safe grounding and that the grounding resistance value is not greater than 4Ω. If there is a problem, rectify it in time.
Check whether all exposed cable lines are broken or cracked, wrap or replace them with insulating tape in time, and ensure that all terminal blocks are crimped well without looseness.
Do a good job of rainproofing and waterproofing the air compressor, distribution room, switch station, junction box, bearings, etc., and do a good job of post-rain inspection.
During the rainy season, the inspection frequency of energy-saving air compressors should be increased, with special attention paid to the operation of key components such as drainage, power supply, and cooler, to reduce the failure rate and improve production efficiency.
